| 产品型号 | 输入电压(V) | 耐压 | 输出电流 (A) | 导通电阻(HS+LS) | 保护功能 | 特点 | 封装 |
|---|---|---|---|---|---|---|---|
LP1150
|
5-13.2 | 16 | 10 | 0.036 | UVLO、OTP | High-current half-bridge, 5.2V/100mA LDO | FCQFN-24 (4*4) |
LP1140
|
4.2-24 | 30 | 5 | 0.13 | UVLO、OTP、SCP | Full-bridge, 5V/300mA, 3.3V/300mA, Dual LDO | TQFN-20(4*4) |
LP1130B
|
4.3-13.2 | 30 | 8 | 0.02 | UVLO、OTP | High-current half-bridge | SOP8 |
LP1130A
|
4.3-13.2 | 30 | 5 | 0.032 | UVLO、OTP | Half‑bridge | SOP8 |
LP1130
|
4.3-13.2 | 30 | 5.8 | 0.025 | UVLO、OTP | Half‑bridge | SOP8 |
| 产品型号 | 通道 | 输入电压(V) | 静态电流(uA) | 驱动电流(A) | 特点 | 封装 |
|---|---|---|---|---|---|---|
LPD2103
|
2(HS+LS MOS Driver) | 10-20 | 100 | 1.5/-1.8 | Half-bridge driver IC with 250V switching capacity,supports switching node slew rate up to 50V/ns, featuring output interlock and dead-time protection. | SOP8 |
LPD2105
|
2(HS+LS MOS Driver) | 10-20 | 100 | 0.3/-1.0 | 600V half-bridge driver IC withintegrated bootstrap diode, supporting switching node slew rate up to 50V/ns, featuring output interlock and dead-time protection. | SOP8 |
LPD2106
|
2(HS+LS MOS Driver) | 10-20 | 100 | 0.3/-1.0 | Half-bridge driver IC with 600V switching capability, supporting up to 50V/ns switching node slew rate. Features interlock and dead-time protection on the outputs. | SOP8 |
LP1115C
|
2ch HS+LS MOS Driver/1(Boost) | 2.5-13.2/2.5-15 | 700/350 | 3.5/3 | Full-bridge driver IC with an integrated wide-input (up to 20V) asynchronous boost converter and on-chip bootstrap diodes. | TQFN-24(4*4) |
LP1115B
|
2ch HS+LS MOS Driver/1(Boost) | 2.5-13.2/2.5-24 | 700/350 | 3.5/3 | Full-bridge driver IC with an integrated asynchronous boost converter supporting up to 24V wide input range, and integrated bootstrap diodes. | TQFN-24(4*4) |
LP1115/A
|
2ch HS+LS MOS Driver/1(Boost) | 2.5-13.2/2.5-24 | 700/350 | 3.5/3 | Full-bridge driver IC with built-in wide-voltage asynchronous Boost converter | TQFN-24(4*4) |
LP1111A
|
HS+LS MOS Driver | 4.5-13.2 | 700 | 3.5 | Half-bridge driver IC | SOP8/DFN-8(2*2) |
LP1110
|
HS+LS MOS Driver | 4.5-13.2 | 700 | 3.5 | Half-bridge driver IC | DFN-8(3*3) |
| 产品型号 | 工作电压(V) | 耐压(V) | 输出电流 (A) | 导通电阻(HS+LS) | 保护功能 | 特点 | 封装 |
|---|---|---|---|---|---|---|---|
LPD8844
|
8-60 | 65 | 2.5 | 0.45 | UVLO、OTP、OCP | Four independent half‑bridge drivers with low‑power sleep mode, supports positive/negative power supply operation, integrated LDO, and fault signal output. | ESSOP-28/QFN5x5-28 |
LPD8812
|
8.2-40 | 45 | 1.6 | 0.85 | UVLO、OTP、OCP | Dual H‑bridge stepper motor driver with low‑power sleep mode, integrated current sensing and current regulation and fault signal output. | ESSOP-28/QFN5x5-28 |
LPD8837
|
2.5-15 | 18 | 2 | 0.35 | UVLO、OTP、OCP | Brushed DC motor driver with low-power sleep mode. | SOP8/DFN2*2-6 |
LPD8234
|
4.5-40 | 45 | 3.6 | 0.6 | UVLO、OTP、OCP | Brushed DC motor driver with integrated current sensing (no external sense resistor required), I2C interface, embedded motor control algorithm, supports programmable current voltage and speed control. | QFN3*3-16 |
LPD8880A
|
4.5-36 | 40 | 3.6 | 0.5 | UVLO、OTP、OCP | Brushed DC motor driver with integrated current sensing (no external sense resistor required), current regulation, and optimized control logic that eliminates a dedicated PWM control pins. | ESOP8 |
LPD8880
|
4.5-36 | 40 | 3.6 | 0.5 | UVLO、OTP、OCP | Brushed DC motor driver with integrated current sensing (no external sense resistor required)and current regulation. | ESOP8 |
LPD8870
|
4.5-36 | 40 | 3.6 | 0.5 | UVLO、OTP、OCP | Brushed DC motor driver with integrated current sensing and current regulation. | ESOP8 |
LPD8833
|
2.7-13 | 16 | 1 | 1 | UVLO、OTP、OCP | Dual H‑bridge stepper motor driver, integrated current sensing, low‑power sleep mode. | ETSSOP16/QFN3*3-16 |
LPD6208
|
2.4-15 | 17 | 0.2 | 6.5 | UVLO、OTP、OCP | Brushed DC motor drive | SOP8/SOT23-6 |
| 产品型号 | 输入电压(V) | 耐压 | 输出电流 (A) | 导通电阻(HS+LS) | 保护功能 | 特点 | 封装 |
|---|---|---|---|---|---|---|---|
LPD1M0550A
|
10~20 | 500V | 5 | 2.8 | UVLO、OTP | Single-phase 500V/5A IPM Module | ESOP13 |
LPD1M0350A
|
10~20 | 500V | 3 | 5.6 | UVLO、OTP | Single-phase 500V/3A IPM Module | ESOP13 |